Overview

The Klipsch RP-6000F II is a floorstanding speaker from the Reference Premiere series, built around dual 6.5-inch Cerametallic woofers and a 1-inch titanium tweeter on Klipsch's signature Tractrix horn. It's the middle tower in the lineup, with more scale than the RP-5000F II and a smaller footprint than the RP-8000F II. It suits mid-size to large living rooms where it can anchor a stereo system or the front of a home theatre.

The 1-inch Linear Travel Suspension (LTS) titanium tweeter sits in a larger 90° x 90° silicone composite hybrid Tractrix horn, which focuses high frequencies toward the listening area for crisp, clear detail. Its vented housing reduces the standing waves behind the diaphragm. The redesigned Cerametallic woofers are rigid and light, with Faraday rings to reduce distortion, and dual rear-firing Tractrix ports are shaped to cut port noise for cleaner bass. Klipsch rates the RP-6000F II at 38 Hz to 25 kHz (±3 dB).

With 96 dB sensitivity, the RP-6000F II plays loud with relatively little amplifier power. The internally braced MDF cabinet uses a divided design to minimize resonance, and cast aluminum feet decouple the speaker from the floor. Aluminum binding posts support bi-wiring and bi-amping, hidden rear connections make adding RP-500SA II Dolby Atmos speakers on top a tidy job, and a magnetic grille lets you show or hide the horn.

Simcoe Audio Video Insight

Sensitivity is the number to watch with Klipsch towers: at 96 dB, the RP-6000F II gets loud on modest receiver power, so you rarely need a large separate amplifier. Plan on space behind it, since both Tractrix ports fire out the back and pushing the speaker hard against a wall can make bass heavier. If you think you'll want Dolby Atmos later, the RP-500SA II sits on top and connects through the hidden rear terminals, so there's no ceiling work involved.

More Info

Why the Klipsch RP-6000F II Stands Out

Buyer's Guide

Who It's For

• Mid-Size to Large Rooms: Want full-range sound with real scale.
• Home Theatre Builders: Want a front pair that matches RP centres and surrounds.
• Future Atmos Adopters: Want towers that take height speakers on top later.

How It Compares

Within Reference Premiere II, the RP-5000F II uses dual 5.25" woofers (40 Hz to 25 kHz, 95 dB) and the RP-8000F II steps up to dual 8" woofers (35 Hz to 25 kHz, 98 dB). The RP-6000F II sits between them with dual 6.5" woofers, reaching 38 Hz at 96 dB sensitivity in a 39.6"-tall cabinet. Choose it when the RP-5000F II feels too small for the room and the RP-8000F II too large.