Free Shipping

We only ship within Canada. Items purchased online qualify for free shipping!

30 Day Returns

All products are eligible for returns within 30 days. All original packaging is required.

Installation & Calibration

Ask about our installation services on home theatre & stereo equipment along with automation.


Klipsch RP-504C II Center Channel Speaker

Overview

The Klipsch RP-504C II is a centre channel speaker from the Reference Premiere series, pairing four 5.25-inch Cerametallic woofers with a 1-inch titanium tweeter on Klipsch's Tractrix horn. It's the largest RP II centre, with the deepest bass, highest sensitivity and most power handling of the three, so dialogue keeps pace with big towers in a large room. It's built for home theatres anchored by RP-6000F II or RP-8000F II towers.

The 1-inch Linear Travel Suspension (LTS) titanium tweeter sits in a 90° x 90° silicone composite hybrid Tractrix horn, which focuses high frequencies toward the listening area for clear dialogue, and its vented housing reduces standing waves behind the diaphragm. The four Cerametallic woofers are rigid and light, with Faraday rings to reduce distortion. Klipsch rates the RP-504C II at 50 Hz to 25 kHz (±3 dB) with 96 dB sensitivity and 150 W continuous (600 W peak) power handling.

A rear-firing Tractrix port supports the bass, and the internally braced MDF cabinet has a satin-painted baffle with a scratch-resistant finish. The input panel uses audiophile-grade wire and aluminum binding posts, cork pads keep it secure on a console or table, an angle screw is included, and a magnetic grille lets you show or hide the horn.

Simcoe Audio Video Insight

The RP-504C II is 32 inches wide and just over 15 inches deep, so measure your console before ordering; it needs a deep shelf, and the rear port should have some breathing room rather than being pushed into an enclosed cabinet. Aim the tweeter toward seated ear height. With 96 dB sensitivity it matches the RP-6000F II and comes close to the RP-8000F II, so voices stay level with the towers as the volume rises. If you're within our Central Ontario service area, our custom install team can help with placement and calibration in a dedicated theatre.

More Info

Why the Klipsch RP-504C II Stands Out

Four 5.25" Cerametallic Woofers

Rigid, light cones with Faraday rings.

Titanium LTS Tweeter

Vented for clean, detailed highs.

90° x 90° Tractrix Horn

Focuses dialogue toward your seat.

50 Hz Extension

Deepest of the RP II centres.

96 dB Sensitivity

150 W continuous power handling.

Cork Pads

Secure on a console or table.

Buyer's Guide

Who It's For

  • Large Home Theatres: Want a centre that keeps pace with big towers.
  • RP-6000F II and RP-8000F II Owners: Want a matched front stage.
  • Deep Media Consoles: Have room for a 15"-deep centre.

How It Compares

The RP-500C II uses two 5.25" woofers, rated at 56 Hz to 25 kHz with 94 dB sensitivity and 100 W continuous power handling, in a 19.34"-wide, 10.58"-deep cabinet. The RP-504C II doubles the woofers to four, reaching 50 Hz at 96 dB sensitivity with 150 W continuous power handling, in a 32.06"-wide, 15.08"-deep cabinet. Choose the RP-504C II for large rooms and big towers, the RP-500C II for most consoles, and the sealed RP-404C II for shallow mantles or in-wall use.

Klipsch RP-504C II Center Channel Speaker Specifications

General Information
ModelRP-504C II
BrandKlipsch
SeriesReference Premiere
Product TypeCentre channel speaker
Colours AvailableEbony, Walnut
Audio
Tweeter1" Titanium LTS vented tweeter with hybrid cross-section expanded Tractrix horn (90° x 90°)
WoofersQuad 5.25" Cerametallic cone woofers with Faraday rings
Frequency Response50 Hz - 25 kHz (±3 dB)
Sensitivity96 dB @ 2.83 V / 1 m
Power Handling (Continuous/Peak)150 W / 600 W
Nominal Impedance8 ohms compatible
Crossover Frequency650 Hz / 1,950 Hz
Design
Enclosure TypeBass reflex via rear-firing Tractrix port
Enclosure MaterialMDF, internally braced
InputsSingle aluminum binding posts
GrilleMagnetic
BaseCork pads
AccessoriesAngle screw
Physical
Dimensions (H x W x D)6.87 x 32.06 x 15.08 in (17.4 x 81.4 x 38.3 cm)
Weight36.3 lb (16.45 kg)

Simcoe Audio Video Installation

Our professional team of designers and installers provide custom design solutions and installation for existing homes and new builds. We work with home owners, home builders and designers to create scalable solutions tailored to you.

Home Theatre & Media Rooms | Home Audio Solutions | AV Automation

Klipsch RP-504C II Center Channel Speaker FAQs

Will the RP-504C II fit my console?

It measures 6.87" tall, 32.06" wide and 15.08" deep, and weighs 36.3 lb (16.45 kg), so you'll need a wide, deep shelf. Leave some space behind it for the rear-firing port.

Which towers does it match?

It's part of the Reference Premiere II family and shares the titanium LTS tweeter, Tractrix horn and Cerametallic woofer design of the RP II towers. Its 96 dB sensitivity matches the RP-6000F II.

Should I choose the RP-504C II or the RP-500C II?

The RP-504C II has four woofers instead of two, reaching 50 Hz versus 56 Hz with higher sensitivity and power handling, but needs a 32"-wide, 15"-deep space. The RP-500C II suits most consoles.

How much amplifier power does it need?

Not much. With 96 dB sensitivity and 150 W continuous (600 W peak) power handling at a nominal 8 ohms, a typical AV receiver drives it comfortably.

Loading form…