{"product_id":"fiio-btr11-portable-bluetooth-headphone-amplifier","title":"FiiO BTR11 Portable Bluetooth Headphone Amplifier","description":"\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eThe FiiO BTR11 clips onto a collar, strap, or bag and adds Bluetooth to the wired headphones or IEMs you already own — no need to replace gear you like just to go wireless.\u003c\/p\u003e\u003cp\u003eUnder the clip is a dedicated Bluetooth chip (BES2700IHC) paired with its own amplifier chip (HT97220), running Bluetooth 5.3 with LDAC support alongside the usual AAC and SBC. That means Android users get close to wired sound quality over the wireless connection, not just a basic Bluetooth signal. The single 3.5mm output puts out up to 45mW into a 16-ohm load (30mW into 32 ohms) — enough power for the vast majority of wired IEMs and portable headphones.\u003c\/p\u003e\u003cp\u003eA multi-function button handles playback and calls, a status LED shows power and codec at a glance, and the reversible Type-C port recharges the unit in under 1.5 hours. Battery runs about 15 hours in AAC mode, or 8.5 hours running LDAC. It's the simplest model in FiiO's BTR lineup, available in Black.\u003c\/p\u003e\u003ch4\u003eSimcoe Audio Video Insight\u003c\/h4\u003e\u003cp\u003eThe BTR11 is the entry point in FiiO's BTR family, and it's worth knowing what that means in practice: it's single-ended only, with one 3.5mm output and no 4.4mm balanced jack, so it's built for headphones and IEMs that already terminate in a standard 3.5mm cable. The back clip is a genuinely useful detail rather than an afterthought — it anchors the unit to a collar, strap, or bag so the cable doesn't pull on your ears the way a pocketed dongle can. If LDAC battery life matters more than outright power, running it in AAC mode instead stretches things from 8.5 hours to about 15.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBest for the FiiO BTR11:\u003c\/strong\u003e Clip it to a shirt collar or bag strap with the cable running up to your ears, rather than leaving it loose in a pocket where the cable tugs with every movement.\u003c\/p\u003e\u003ch3\u003eMore Details\u003c\/h3\u003e\u003ch4\u003eWhy It Wins\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClip-on design\u003c\/strong\u003e: A back clip keeps the unit anchored to clothing or a bag instead of sitting loose, so the headphone cable doesn't pull at odd angles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBluetooth 5.3 with LDAC\u003c\/strong\u003e: Covers the codec most Android phones use for higher-resolution wireless audio, not just the baseline AAC and SBC most basic dongles support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSymmetrical Type-C charging\u003c\/strong\u003e: The reversible port means there's no wrong way to plug in the charging cable, even in the dark or by feel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat Makes It Different\u003c\/h4\u003e\u003cp\u003eA lot of clip-on Bluetooth receivers in this category are SBC-only or drop LDAC support to simplify the design. The BTR11 keeps LDAC in the codec lineup and adds a proper multi-function control key and status LED, which puts it a step above generic clip-on dongles while staying simpler than FiiO's balanced-output models.\u003c\/p\u003e\u003ch4\u003eTechnical Highlights\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBES2700IHC and HT97220 chipset\u003c\/strong\u003e: A dedicated Bluetooth chip paired with a separate amplifier chip, rather than relying on the Bluetooth chip's built-in amp alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 45mW+45mW into 16Ω\u003c\/strong\u003e: Enough headroom for most easy-to-drive IEMs and portable headphones without needing a balanced connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e120mAh battery\u003c\/strong\u003e: Small enough for the compact, clip-on form factor while still delivering close to a full day of AAC listening.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eBuyers Guide\u003c\/h3\u003e\u003ch4\u003eWho This Is For\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe wired-IEM holdout\u003c\/strong\u003e: Someone with a favourite pair of wired IEMs or headphones who doesn't want to replace them just to go wireless.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe first-time Bluetooth amp buyer\u003c\/strong\u003e: Anyone curious about what a dedicated Bluetooth amp adds over a phone's built-in Bluetooth, without needing a balanced-output model they may not use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe commuter who hates dongles in pockets\u003c\/strong\u003e: Someone who wants the receiver clipped to a collar or bag rather than rattling around loose.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIdeal Use Case\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommuting or exercising\u003c\/strong\u003e: Using wired IEMs that would otherwise need a cable running to a phone in a pocket or armband.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdding Bluetooth to existing wired gear\u003c\/strong\u003e: Bringing LDAC-quality Bluetooth to headphones that never came with wireless support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple, single-output listening\u003c\/strong\u003e: A straightforward amp for anyone who only ever uses a standard 3.5mm cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat To Pair It With\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm wired IEMs or headphones\u003c\/strong\u003e: The BTR11's only output, so anything already terminated in a standard 3.5mm plug works without an adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAn Android phone with LDAC support\u003c\/strong\u003e: Needed on the source side to get the full benefit of the BTR11's LDAC decoding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA collar, strap, or bag\u003c\/strong\u003e: The back clip is designed to anchor to one of these rather than sit loose in a pocket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eAlternative Options\u003c\/h3\u003e\u003cp\u003eFor anyone who wants a 4.4mm balanced output alongside 3.5mm, the BTR13 adds that along with a colour screen and USB sound card mode for a modest step up. Those who need more outright power for harder-to-drive gear should look at the BTR15 or BTR17, both of which push considerably more balanced wattage. FiiO's Retro Nano is worth a look too, for anyone who wants similar single-ended and balanced outputs in a different, retro-styled shape with a swappable battery.\u003c\/p\u003e","brand":"FiiO","offers":[{"title":"Default Title","offer_id":48358993166557,"sku":"LM-IORX-OEFT","price":29.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0331\/1930\/5859\/files\/fiio-btr11-portable-bluetooth-headphone-amp-black-front.png?v=1786466460","url":"https:\/\/www.simcoeav.ca\/fr\/products\/fiio-btr11-portable-bluetooth-headphone-amplifier","provider":"Simcoe Audio Video","version":"1.0","type":"link"}