Free shipping in Canada!

L'iDefender+ est un périphérique audio USB plus spécialisé, spécialement conçu pour s'attaquer aux boucles de terre (ou terre) qui peuvent causer de vrais problèmes avec certains ordinateurs systèmes, entraînant généralement un bourdonnement ou un bourdonnement irritant des haut-parleurs. Lorsqu'il est branché sur la prise USB de l'appareil source, l'iDefender+ détecte si il y a un problème de boucle de masse, causé par la présence de plusieurs masses qui s'ajoutent bruit. Il rompt la boucle de masse en déconnectant "intelligemment" l'ordinateur la terre; en plus d'éliminer le bourdonnement audible de la boucle de masse, il réduit le bruit du système sol, améliorant la résolution et le contraste dynamique. Lorsqu'il est utilisé avec un DAC qui s'appuie sur l'alimentation USB d'un ordinateur, plutôt que sur alimenté par le secteur ou une batterie intégrée, l'iDefender+ offre une capacité supplémentaire avantage. Si une alimentation externe est branchée sur la prise USB-C sur le côté, elle bloque l'alimentation de l'ordinateur et alimente à la place le DAC avec l'alimentation du alimentation externe ; si un adaptateur d'alimentation de haute qualité et à faible bruit tel que l'iPower d'iFi est utilisé, les performances du DAC USB seront nettement améliorées. Comme l'iSilencer +, l'iDefender + améliore les performances de la sortie iDefender3.0 avec l'ajout de condensateurs au tantale à faible ESR pour l'entrée et la sortie filtration. Il est également disponible en trois versions pour s'adapter aux équipements connectés - USB-A vers USB-A, USB-C vers USB-A et USB-C vers USB-C. Encore une fois, l'USB3.0 et Les normes USB2.0 sont prises en charge et les connecteurs sont plaqués or.

Product Specifications

Feature Specification
Interface USB-C to USB-A
Function Ground loop isolation
Signal Improvement Reduces distortion, buzz, and hum
Compatibility USB-A and USB-C audio devices, DACs, amplifiers
Dimensions 50mm x 20mm x 9mm
Weight 12g
Material High-quality aluminum housing

Customer Reviews

Based on 8 reviews
88%
(7)
13%
(1)
0%
(0)
0%
(0)
0%
(0)
K
Kelvin Dodd

Had major ground loop interference noise from the USB output of my computer connected to an Onyx Producer 2+2 audio/midi interface, plugged into a Kawai piano feeding iLoud monitor speakers.The iDefender + solved the problem. The noise was killed and I'm very happy with the result.Purchased a CanaKit 3.5A USB C power supply to make sure the interface had adequate power.

C
C Dennar

This stopped the buzz and interference sounds that has been in my studio for years. I will say this is the best product I bought in 2023 😊. Cheap but powerful too for noise in the studio. I tried expensive products before this and none of them worked. It was delivered earlier than expected and no complaints. I strongly recommend this product and seller.

M
Matthias Heymann

I have an Focusrite Scarlett 4i4 external audio interface, which (important!) draws its power from its USB C connection to my computer's USB hub. I noticed that whenever I connected my piano keyboard's MIDI interface to my computer (also via USB), then the Focusrite added a 2400 Hz hissing sound to any signal routed into its Audio In. The reason was that this MIDI interface disturbed the ground signal in the USB system, which the audio interface needs to properly interpret the Audio In signal. Changing the MIDI interface (MIDI to USB) didn't change the problem, as the ground was disturbed already in the piano.This iFi Defender, removed the hissing sound completely. Two important things to consider: (1) I plugged the Defender between USB hub and the piano's MIDI interface (!), not between USB hub and Focusrite audio interface. (2) Make sure (!!!) you add a 5V (!!!) USB-C signal into the Defender's side; without it, the hissing doesn't go away; higher voltages short-circuited my system, causing me a major scare.So take a regular small (!) cheap iPhone charging block for this 5V side signal. I first used just some free USB power slot from my high-end Anker charger, which usually provides only as much power as needed, but more than 5V in this case apparently; here this literally overpowered the Defender and caused a crash; so don't make the same mistake.All that said, I am quite happy to finally having gotten rid of the hissing sound. The Defender seems expensive, but I am really happy I found a way to solve my problem finally! :-)

N
Nokiron

This completely eliminated the buzzing noise from my powered speakers from my PC.I have everything connected to one outlet to avoid ground loops, but I had some major buzzing noises from the speakers that matched the frequency and noise of the coil whine from the GPU. The reason the noise propagated to the speakers was because of my audio interface, which is an Audient EVO4 which is USB-powered only. So the iDefender+ bypassed the power connection from the PC which in turn removed any kind of buzzing noise. Very happy with the result, even though it's quite expensive it did the job.Keep in mind though that you absolutely do have to plug this device in on the side with separate power from a charger.

S
Susan

Ich bin so froh, dass es diesen USB-Stick gibt. Im Januar 2022 habe ich ihn an meinen Rechner angeschlossen und seitdem sind meine aktiven Yamaha-Lautsprecher ruhig! Herrlich! Ein Kumpel von mir hatte auch Probleme mit Brummschleifen, also habe ich ihm diesen Stick empfohlen und bei der Gelegenheit auch gleich eine Bewertung geschrieben. Der USB-Stick funktioniert zuverlässig. Ein Hinweis: Ich habe ein Steinberg UR 22 mk II Sound Interface, das mehr Strom zieht als ich dachte. Ein schwaches altes Handyladegerät hat nicht ausgereicht, aber ein Macbook-Ladegerät mit USB-C funktioniert wunderbar.

iFi Audio Digital Enhancer iDefender USB C vers un périphérique de boucle de masse FAQs

How does the iFi Audio iDefender+ eliminate ground loop noise in my audio system?

The iFi Audio iDefender+ detects and disrupts ground loops by disconnecting the USB ground from your computer, effectively eliminating hum and noise caused by these loops. This results in a cleaner audio signal and improved sound quality.

Can the iDefender+ improve the performance of my USB-powered DAC?

Yes, by connecting a clean external 5V power supply to the iDefender+'s USB-C port, it replaces the potentially noisy power from your computer with a cleaner source. This can enhance the performance of USB-powered Digital-to-Analog Converters (DACs) by providing them with a more stable and noise-free power supply.

Do I need to use an external power supply with the iDefender+?

An external power supply is optional when using the iDefender+. Without it, the device will still break ground loops to reduce noise. However, for optimal performance, especially with USB-powered DACs, connecting a clean 5V external power supply is recommended to provide a more stable power source.

Is the iDefender+ compatible with USB 3.0 devices?

Yes, the iDefender+ is compatible with USB 3.0 devices, ensuring high-speed data transfer and broad compatibility with modern audio equipment.