Overview

The Klipsch RP-8000F II is a floorstanding speaker from the Reference Premiere series, pairing dual 8-inch Cerametallic woofers with a 1-inch titanium tweeter on Klipsch's signature Tractrix horn. It's the largest of the three RP II towers, with the deepest bass extension and highest sensitivity in the trio. It's built for large living rooms and dedicated home theatres where the front speakers need real scale for movies and music.

The 1-inch Linear Travel Suspension (LTS) titanium tweeter sits in a 90° x 90° silicone composite hybrid Tractrix horn, which focuses high frequencies toward the listening area for crisp, clear detail, and its vented housing reduces the standing waves behind the diaphragm. The redesigned Cerametallic woofers are rigid and light, with Faraday rings to reduce distortion, and dual-chamber rear-firing Tractrix ports are shaped to cut port noise for cleaner, more powerful bass. Klipsch rates the RP-8000F II at 35 Hz to 25 kHz (±3 dB).

With 98 dB sensitivity, the RP-8000F II plays very loud with relatively little amplifier power. The internally braced MDF cabinet uses a divided design to minimize resonance, and cast aluminum feet decouple the speaker from the floor. Aluminum binding posts support bi-wiring and bi-amping with Dolby Atmos passthrough, so adding RP-500SA II Atmos speakers on top keeps the wiring tidy, and a magnetic grille lets you show or hide the horn.

Simcoe Audio Video Insight

The 98 dB sensitivity is what sets this tower apart: it means a standard AV receiver can drive the RP-8000F II to big, clean volume in a large room, so a separate power amplifier is optional rather than necessary. It's a substantial speaker at 43.1 inches tall, 18.25 inches deep and 61.4 lb, so check the space beside your TV and leave room behind it for the rear-firing ports. If Dolby Atmos is in your plans, the passthrough terminals let an RP-500SA II sit on top without extra wire runs.

More Info

Why the Klipsch RP-8000F II Stands Out

Buyer's Guide

Who It's For

• Large Rooms and Home Theatres: Want front speakers with real scale.
• Receiver-Powered Systems: Want high output without separate amps.
• Future Atmos Adopters: Want towers that take height speakers on top later.

How It Compares

Within Reference Premiere II, the RP-5000F II uses dual 5.25" woofers (40 Hz to 25 kHz, 95 dB) and the RP-6000F II dual 6.5" woofers (38 Hz to 25 kHz, 96 dB). The RP-8000F II steps up to dual 8" woofers, reaching 35 Hz at 98 dB sensitivity, with 150 W continuous power handling versus 125 W and 100 W. Choose it for the largest rooms, and the RP-6000F II when a smaller cabinet fits better.