Klipsch RP-6000F MKII Reference Premiere Floor Standing Speaker
We are an authorized Klipsch dealer!
Email Your Question
Pairs well with
Free Shipping
We only ship within Canada. Items purchased online qualify for free shipping!
30 Day Returns
All products are eligible for returns within 30 days. All original packaging is required.
Installation & Calibration
Ask about our installation services on home theatre & stereo equipment along with automation.
Klipsch RP-6000F MKII Reference Premiere Floor Standing Speaker
Overview
A mid-size to large room needs a floorstanding tower with enough scale to fill it properly, without the compromises that come from stretching a smaller design too far. The Klipsch RP-6000F II is built for that middle ground.
The RP-6000F II pairs a 1" titanium Linear Travel Suspension (LTS) tweeter with a hybrid Tractrix horn for crisp, detailed highs, and dual 6.5" Cerametallic woofers for deep bass and a clear midrange. A 2.5-way passive design and dual rear-firing Tractrix ports extend low-frequency response down to 38Hz.
The reinforced MDF cabinet with internal bracing keeps resonance low, and dual binding posts support bi-wiring or bi-amping. Cast aluminum feet and a magnetic cloth grille round out the design, finished in ebony or walnut vinyl.
Simcoe Audio Video Insight
For Central Ontario clients who want more scale than the RP-5000F II without stepping up to the flagship RP-8000F II, the RP-6000F II's 6.5" woofers are the right middle ground — enough output and bass extension for a proper home theatre or serious two-channel system without the size or cost of the largest tower in the lineup.
More Info
Why the Klipsch RP-6000F II Stands Out
Dual Cerametallic Woofers
Two 6.5" woofers deliver deep bass and a clear, uncoloured midrange.
Titanium LTS Vented Tweeter
Minimizes distortion and standing waves for detailed, clear highs.
Hybrid Tractrix Horn
Improves high-frequency transfer and soundstage depth.
Bi-Wire/Bi-Amp Capable
Dual binding posts let you separate high and low frequency currents for further refinement.
Reinforced, Low-Resonance Cabinet
Internal bracing keeps bass tight and vocals clear at higher volumes.
Atmos-Ready with RP-500SA II
Designed to accept the RP-500SA II elevation speaker on top for height channels.
Buyer's Guide
Who It's For
- The Mid-to-Large Room Listener: wants more scale than an entry tower without the size of the flagship.
- The Reference Premiere System Builder: wants a tonal match for RP-series centre and surround speakers.
- The Future Atmos Adopter: wants a tower that's ready for height speakers when the budget allows.
How It Compares
The RP-6000F II sits between the RP-5000F II and RP-8000F II in Klipsch's Reference Premiere floorstanding lineup. Its dual 6.5" woofers offer more bass extension and output than the RP-5000F II's 5.25" woofers, while the flagship RP-8000F II steps up further with dual 8" woofers for the largest rooms.
Klipsch RP-6000F MKII Reference Premiere Floor Standing Speaker Specifications
| General Information | |
|---|---|
| Model | Klipsch RP-6000F II |
| Series | Reference Premiere |
| Type | Floorstanding Speaker (Sold Each) |
| Driver Configuration | 2.5-Way Passive |
| Audio | |
| Tweeter | 1" Titanium LTS Vented Tweeter with Hybrid Tractrix Horn |
| Woofers | Two 6.5" Cerametallic Cone Woofers |
| Frequency Response (±3dB) | 38Hz – 25kHz |
| Sensitivity (2.83V/1m) | 96 dB |
| Impedance | 8 Ohms |
| Power Handling | 125W RMS / 500W Peak |
| Crossover Frequency | 1,770 Hz |
| Enclosure Type | Bass-Reflex, Dual Rear-Firing Tractrix Ports |
| Connectivity | |
| Speaker Inputs | Dual Binding Posts (Bi-Wire/Bi-Amp Capable) |
| Physical Specifications | |
| Cabinet Material | Reinforced MDF with Internal Bracing |
| Cabinet Finish | Ebony or Walnut Vinyl |
| Dimensions (W x H x D) | 9.29" x 39.60" x 17.57" (23.6 x 100.6 x 44.6 cm) |
| Weight | 49.4 lbs (22.4 kg) |
| Grille | Magnetic Cloth Grille |
| Feet | Pre-Installed Cast Aluminum Feet |
| Compatibility | |
| Dolby Atmos Ready | Yes, with Klipsch RP-500SA II Elevation Speaker |