Hegel H30A Power Amplifier

Overview

The Hegel H30A is Hegel's reference power amplifier, nicknamed The Orchestra. Designed as a mono amplifier, it delivers more than 1100 watts into 8 ohms and stays completely stable even with 1-ohm loads, so speaker sensitivity and difficult impedance curves stop being a concern. It can also be used as a stereo power amplifier. It's for listeners building a reference system who want an amplifier that can drive virtually any loudspeaker with authority and ease.

The power supply uses two separate 1000 VA toroidal transformers for fast response and minimal transformer hum, backed by 270,000 μF of capacitors so there's always power in reserve, even for large orchestral pieces at high volume. The output stage uses 56 high-speed, ultra-low-distortion bipolar transistors rated at 15 A and 200 W each.

Power means little without detail, so the input stage uses hand-matched single-pair FET transistors with identical values to eliminate higher-order harmonic distortion, the kind that makes amplifiers sound harsh. Hegel's patented SoundEngine then monitors the signal and cancels other distortion in real time with a feed-forward design. The result is deep bass that never dominates, detailed highs that never tire and a relaxed, natural sound.

Simcoe Audio Video Insight

The H30A is designed as a mono amplifier first, so a pair, one per speaker, driven from a preamplifier such as the Hegel P20 makes the most of it. The 12 V trigger input lets both amplifiers power on with the preamp. At 47.4 kg each, plan for a sturdy, well-ventilated shelf or amp stand, and use the balanced XLR inputs when your preamp has them.

More Info

Why the Hegel H30A Stands Out

Over 1100 W in Mono

Into 8 ohms, stable to 1 ohm.

Dual 1000 VA Transformers

270,000 μF of capacitors.

56-Transistor Output Stage

15 A, 200 W bipolar transistors.

Hand-Matched FET Input

Removes higher-order distortion.

SoundEngine

Real-time, feed-forward distortion cancelling.

Mono or Stereo

XLR, RCA and 12 V trigger inputs.

Buyer's Guide

Who It's For

  • The Reference System Builder: Wants Hegel's flagship power amplifier.
  • The Demanding Speaker Owner: Needs stability into very low impedances.
  • The Mono Block Enthusiast: Wants a dedicated amplifier for each speaker.

How It Compares

Compared with Hegel's H20 stereo power amplifier, which delivers more than 200 watts per channel, the H30A is a mono-first design with more than 1100 watts into 8 ohms, a 2000 VA power supply and stability down to 1 ohm, built for the most demanding speakers and largest rooms.

Hegel H30A Power Amplifier Specifications

General Information
ModelH30A
BrandHegel
Product TypeReference power amplifier (mono or stereo)
Colours AvailableBlack
Amplification
Output PowerMore than 1100 W into 8 ohms (mono, 1 kHz, 1% THD)
Minimum Load1 ohm
Output Stage56 x 15 A, 200 W high-speed, ultra-low-distortion bipolar transistors
Damping FactorMore than 500 (mono)
Signal-to-Noise RatioMore than 100 dB
CrosstalkLess than -100 dB
DistortionLess than 0.003% at 100 W, 8 ohms
IntermodulationLess than 0.01% (19 kHz + 20 kHz)
Inputs and Outputs
InputsRCA unbalanced, XLR balanced
Input ImpedanceBalanced 20 kohm, unbalanced 10 kohm
Trigger Input12 V
Speaker OutputsOne pair of heavy-duty gold-plated terminals
Power and Physical
Power Supply2000 VA dual mono (2 x 1000 VA toroidal), 270,000 μF capacitors
Power Consumption120 W idle
Dimensions (H x W x D)24 x 43 x 57.5 cm (9.4 x 17 x 22.6 in)
Weight47.4 kg (104.5 lb)

Simcoe Audio Video Installation

Our professional team of designers and installers provide custom design solutions and installation for existing homes and new builds. We work with home owners, home builders and designers to create scalable solutions tailored to you.

Home Theatre & Media Rooms | Home Audio Solutions | AV Automation

Hegel H30A Power Amplifier FAQs

How powerful is the Hegel H30A?

In mono it delivers more than 1100 watts into 8 ohms, and it's stable with loads as low as 1 ohm.

Can the H30A be used in stereo?

Yes. It's designed as a mono power amplifier but can also be used as a stereo power amplifier.

What inputs does the H30A have?

Balanced XLR and unbalanced RCA inputs, plus a 12 V trigger input.

How heavy is the H30A?

It weighs 47.4 kg (104.5 lb) and measures 24 x 43 x 57.5 cm (H x W x D).

Loading form…