





Audiolab 6000A 100 watt RMS Integrated Amplifier with Bluetooth and Phono
We are an authorized Audiolab dealer!
Email Your Question
Pairs well with
Free Shipping
We only ship within Canada. Items purchased online qualify for free shipping!
30 Day Returns
All products are eligible for returns within 30 days. All original packaging is required.
Installation & Calibration
Ask about our installation services on home theatre & stereo equipment along with automation.
Audiolab 6000A 100 watt RMS Integrated Amplifier with Bluetooth and Phono
Overview
A good integrated amplifier should cover everything you listen to without a stack of extra boxes. The Audiolab 6000A is a Class AB integrated amplifier with a built-in DAC, a moving magnet phono stage, Bluetooth, and a dedicated headphone amp, delivering 50W per channel into 8 ohms and 75W into 4 ohms.
Four digital inputs (two coaxial, two optical) feed an ESS ES9018K2M Sabre32 DAC with 32-bit HyperStream architecture and Time Domain Jitter Eliminator, with three selectable digital filters. Three line-level inputs handle analog sources, and a low-noise, JFET-based phono circuit with precise RIAA equalization takes a turntable with an MM cartridge.
The power amp uses a Complementary Feedback (CFB) output topology for linearity, backed by a 200VA toroidal transformer and 60,000µF of reservoir capacity, with up to 9A of output current. Integrated, Pre-Power, and Pre-only modes let it grow with your system.
Simcoe Audio Video Insight
The 6000A suits a system built around one box: turntable, CD player, TV via optical, and a phone over Bluetooth, all through one amplifier. Because it can run as a preamp or a power amp, it stays useful if you add a separate power amplifier later. Note that Audiolab now lists the original 6000A as discontinued, replaced by the 6000A MKII.
More Info
Why the Audiolab 6000A Stands Out
50W Class AB Power
50W per channel into 8 ohms and 75W into 4 ohms, with a maximum output current of 9A.
ES9018K2M DAC
An ESS Sabre32 DAC with HyperStream architecture, Time Domain Jitter Eliminator, and support up to 192kHz.
JFET MM Phono Stage
A low-noise, JFET-based circuit with precise RIAA equalization for moving magnet cartridges.
Bluetooth Streaming
Wireless playback from phones, tablets, and computers.
Three Operating Modes
Integrated, Pre-Power, and Pre-only modes for adding separate amplification later.
Current-Feedback Headphone Amp
A dedicated headphone amplifier for headphones from 20 to 600 ohms.
Selectable Digital Filters
Fast Roll-off, Slow Roll-off, and Minimum Phase filters.
Buyer's Guide
Who It's For
- The Vinyl and Digital Listener: Wants a phono stage and DAC built into one amplifier.
- The Headphone Listener: Wants a dedicated headphone amp alongside speaker amplification.
- The System Builder: Wants preamp and power amp modes for adding components over time.
How It Compares
The Audiolab 6000A MKII replaces the 6000A with an ES9038Q2M DAC, Bluetooth 5.1 with aptX HD, an HDMI ARC input, and 11A of output current, at the same 50W per channel. The Audiolab 7000A steps up to 70W per channel, an ES9038Q2M DAC, HDMI ARC, a PC USB input, and a colour display.
Audiolab 6000A 100 watt RMS Integrated Amplifier with Bluetooth and Phono Specifications
| General Information | |
|---|---|
| Model | Audiolab 6000A |
| Brand | Audiolab |
| Product Type | Integrated Amplifier |
| Operating Modes | Integrated, Pre-Power, Pre only |
| Power Amplifier | |
| Rated Power Output | 2 x 50W (8 ohms), 2 x 75W (4 ohms), THD <1% |
| Max Output Current | 9A |
| Frequency Response | 20Hz - 20kHz (±0.3dB) |
| THD | <0.003% (1kHz @ 40W / 8 ohms) |
| Signal-to-Noise Ratio | >110dB (A-weighted) |
| Gain | +29dB |
| Preamplifier & DAC | |
| DAC | ESS ES9018K2M |
| Max Sampling Frequency | 192kHz |
| DAC THD | <0.0006% (1kHz @ 0dBFS) |
| DAC Signal-to-Noise Ratio | >112dB (A-weighted) |
| Digital Filters | Fast Roll-off, Slow Roll-off, Minimum Phase |
| Phono Input (MM) | 3.1mV sensitivity, 47kΩ // 100pF |
| Preamp Signal-to-Noise Ratio | >110dB (line), >76dB (phono MM) |
| Pre-Out Voltage | 2.3V max. |
| Connectivity | |
| Digital Inputs | 2 x Coaxial, 2 x Optical, Bluetooth |
| Analog Inputs | 3 x Line-level, 1 x Phono (MM) |
| Headphone Load Impedance | 20 - 600Ω |
| Physical Specifications | |
| Dimensions | 445 x 80 x 330 mm |
| Net Weight | 7.8 kg |
| Standby Power | <0.5W |
| Power Requirements | 240V, 230V, 115V, or 100V ~ 50-60Hz (region dependent) |
| Colours Available | Black, Silver |
Simcoe Audio Video Installation
Our professional team of designers and installers provide custom design solutions and installation for existing homes and new builds. We work with home owners, home builders and designers to create scalable solutions tailored to you.
Home Theatre & Media Rooms | Home Audio Solutions | AV Automation


